tvr2b,tvr2g,TVR2J 2003-02-17 1 toshiba fast recovery diode silicon diffused type tvr2b,tvr2g,TVR2J tv applications (fast recovery) average forward current: i f (av) = 0.5 a (ta = 50c) repetitive peak reverse voltage: v rrm = 100 to 600 v reverse recovery time: t rr = 5 to 20 s plastic mold type. maximum ratings (ta 25c) characteristics symbol rating unit tvr2b 100 tvr2g 400 repetitive peak reverse voltage TVR2J v rrm 600 v tvr2b 50 tvr2g 300 reverse voltage (dc) TVR2J v r 500 v average forward current (ta 50c) i f (av) 0.5 a 30 (50 hz) peak one cycle surge forward current (non repetitive) i fsm 33 (60 hz) a junction temperature t j 40 to 125 c storage temperature range t stg 40 to 125 c electrical characteristics (ta 25c) characteristics symbol test condition min typ. max unit peak forward voltage v fm i fm 1.0 a 1.4 v repetitive peak reverse current i rrm v rrm rated 10 a reverse recovery time t rr i f 20 ma, i r 1 ma 5 20 s forward recovery voltage v fr i f 0.1 a, t r 100 ns, t w 5 s 6 v note1: soldering: 5 mm is the minimum to be kept between case and soldering part. note2: lead bending: 5 mm is the minimum to be kept from the case when bend the lead wire. unit: mm jedec do-41 jeita D toshiba 3-3c1a weight: 0.3 g (typ.)
tvr2b,tvr2g,TVR2J 2003-02-17 2 marking type code lot no. cathode mark color: silver month (starting from alphabet a) year (last number of the christian era) code type vr2b tvr2b vr2g tvr2g vr2j TVR2J v r 2 j 200 0 0 160 120 80 40 0.1 0.2 0.3 0.4 0.5 0.6 resistive and inductive load capacitive load average forward current i f (av) (a) ta m ax ? i f (av) maximum allowable temperature ta max (c) peak surge forward current i fsm (a) number of cycles surge forward current (non-repetitive) t j 25c 50 0 1 40 30 20 10 3 10 30 100 60 hz 50 hz
tvr2b,tvr2g,TVR2J 2003-02-17 3 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707ea a restrictions on product use
|
